| Specifications | |
| Width: | 260 |
| Depth: | 180 |
| Height: | 750 |
| Weight: | 36 |
| Utility: | .. |
| Range: | 50 Gms. |
-
Mechanism: Consists of stirrer, glass jar, siphon, timer unit, 53 micron sieve pan, wash bottle. Misc Spec.: 20 micron sieve 100mm Dia., 35mm Ht. (On demand). Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Sand Type: Green Sand & Raw Sand Test:Total Clay Content Application:This equipment helps to determine total clay content in the sand sample.
Precautions: Clean the equipment after use. Protect the Parts from rusting; apply rust preventing oil when not in use. Maintainance: .. Testing Prcoedure: Please contact us for test procedure. Optional Models: Auto Clay Washer (VCWA) Pre-Requisite Equipments: Rapid Dryer (VRD) (Must Have) -
Used to measure retention on Sieves to further calculate fineness number. Transmit Readings to PC or take a print* -
Mechanism: ... Misc Spec.: Consists of base with titration stand on which, burette and remote stirrer are mounted, bottle of methylene blue chemical (Consumable), Filter papers (Consumable). Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Sand Type: Green Sand Test:Active Clay Content Application: To determine the amount active clay (Active Bentonite) in the sand sample.
Precautions: Clean the equipment after use. Maintainance: .. Testing Prcoedure: Please contact us for test procedure. Optional Models: ---- Pre-Requisite Equipments: ----Specifications Width: 320 Depth: 320 Height: 875 Weight: 18 Utility: .. Range: 50 Gms. -
Mechanism: Consists of air tank, water tank, manometer unit, permeability chart, two orifices, rubber seal and siphon. Misc Spec.: .. Sand Type: Green Sand, No-bake Sand, Oil Sand, CO2 Sand Test:Permeability Application:To determine permeability number of green sand, core sand and raw sand.
Precautions: Please contact us for precautions before operating ht einstrument Maintainance: .. Testing Prcoedure: Please contact us for test procedure Optional Models: Electr-Permeter (VEP) Pre-Requisite Equipments: Sand Rammer Along with Base block (VR)Specifications Width: 300 Depth: 300 Height: 440 Weight: 13 Utility: .. Range: Large Orifice-36 to 2450 No. & SmallOrifice-1.1 to 49No. -
Mechanism: Gives compactibility directly in percentage. Also can make a standard specimen for further tests. Accessories; Compactbility tube, specimen tube, a cup, Stripper. Needs compressed air @ 4Kg/cm sq. Higher pressures can be regulated on the FRL unit on the equipment Misc Spec.: Pneumatically actuated with settable pneumatic pressure to meet foundry specific simulation requirements. Sand Type: Green Sand Test:.. Application: Gives compactibility directly in percentage. Also can make a standard specimen for further tests.
Precautions: Clean the equipment after use. Protect the specimen tube from rusting; apply rust preventing oil when not in use. Take care of Hands. Do not insert under the plunger. Use dry air to get long life of cylinder. Remove the water collected in filter time to time. Maintainance: .. Testing Prcoedure: Please contact us for test procedure. Optional Models: Sand Rammer with Base Block (VR+VRB) along with Compactibility tester (VCT) Pre-Requisite Equipments: NASpecifications Width: 275 Depth: 120 Height: 600 Weight: 40 Utility: .. Range: For Squeezer - One Specimen For Compactibilty - 0 to 70 % -
Mechanism: It consists of loading frame to measure the compressive strength in Kg, Useful for insulating /Exothermic Sleeve of Size 75-150 mm Height, 75-250 mm Outside Diameter. Digital readout with overload protection. Misc Spec.: Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Sand Type: Sleeves Test:Compressive strength of insulating /Exothermic Sleeves. Application: To check the maximum compression load which, Exothermic / Insulating sleeve can withstand. Useful for insulating /Exothermic Sleeve of Size 75-150 mm Height, 75-250 mm Outside Diameter.
Precautions: Do not over load during calibration procedure. Maintainance: Clean the equipment after use. Testing Prcoedure: For more details contact us. Optional Models: --- Pre-Requisite Equipments: ---Specifications Width: 460 Depth: 360 Height: 880 Weight: 100 Utility: .. Range: 0 to 2000 kg.
