Mechanism:
· It consists of loading frame , loading mechanism,Force measuring mechanism, , controlled heater to heat the specimen up to 300
oC, and facility to accommodate special specimen tube.
· Digital strength indicator to read wet tensile strength up to 60gms/cm
2, temp. Indicator built in timer.
Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Requires Pneumatic air supply of 6 Kg/cm2.
Misc Spec.:
· Fully automatic cycle to determine Wet tensile strength.
· Computer interfacing with Customized software to acquire analyze & Plot results is available optionally on demand.
· Selectable unit i.e. g/cm2 OR N/mm2
Sand Type: Green Sand
Test:TO Determine Wet tensile strength
Application:The Surface of clay bonded sand mould is strongly heated, for preset time. Some of the water evaporates and recondenses in the cooler part of the mould, and there is a considerable drop in strength at this portion Wet tensile tester measures this strength. In short, it measures tensile strength in condensation zone.
| Specifications |
| Width: |
305 |
| Depth: |
470 |
| Height: |
550 |
| Weight: |
45 |
| Utility: |
To test Wet tensile strength of green sand. |
| Range: |
0 to 60 gms/cm2 |
Precautions:
· Burning Hazard Heater temperature 300
oC.
· Remove accumulated water from FRL unit time-to-time.
Maintainance:
Clean the equipment after use.
Testing Prcoedure:
For more details
contact us.
Optional Models: -
Pre-Requisite Equipments: Sand Rammer along with Base block (VR+VRB)
Mechanism: · It consists of loading frame , loading mechanism,Force measuring mechanism, , controlled heater to heat the specimen up to 300oC, and facility to accommodate special specimen tube. · Digital strength indicator to read wet tensile strength up to 60gms/cm2, temp. Indicator built in timer. Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Requires Pneumatic air supply of 6 Kg/cm2. Misc Spec.: · Fully automatic cycle to determine Wet tensile strength. · Computer interfacing with Customized software to acquire analyze & Plot results is available optionally on demand. · Selectable unit i.e. g/cm2 OR N/mm2 Sand Type: Green Sand Test:TO Determine Wet tensile strength Application:The Surface of clay bonded sand mould is strongly heated, for preset time. Some of the water evaporates and recondenses in the cooler part of the mould, and there is a considerable drop in strength at this portion Wet tensile tester measures this strength. In short, it measures tensile strength in condensation zone.
Mechanism: Consists of a rubber base, sliding carriage assembly, cam with handle (Motorized optional / On demand), metallic blow, and 10mm gauge block & grooving tool. Misc Spec.: . Sand Type: Bentonite Test:Liquid Limit Application:To determine the liquide limit of bentonite