| Specifications | |
| Width: | 115 |
| Depth: | 40 |
| Height: | 165 |
| Weight: | 1 |
| Utility: | .. |
| Range: | 0-100 Nos. |
-
Mechanism: Consists of Carbide tipped plough, dial indicator. Misc Spec.: Employees scratch type test to check bonding and hardness of cores. Sand Type: Resin coated sand, Hot box sand, Cold box sand, No-bake Sand, Oil Sand, CO2 Sand Test:Reads hardness of Cores of most of the types. Application: To find out the hardness of baked or dried cores made out of core sands, resin sands etc.
Precautions: Keep the instrument clean and away from dust ensure that all sticking sand is removed from the instrument before and after every test. Do not tamper with the setting and calibration Maintainance: ... Testing Prcoedure: Contact us for test procedure. Optional Models: --- Pre-Requisite Equipments: --- -
Mechanism:- Controlled Temperature Furnace: 850 C (Adjustable)
- Suitable Computer with OS and Software to record readings, compare graphs, Set Ideal graphs and/or Compare Results with +/-3 Sigma limits to check off limit samples.
This information is critical while choosing type and Make of resin to suite the kind of casting which is under consideration.Sand Type: Resin Coated Sand, No-Bake, Cold Box, CO2, Green Sand Test:Gas Evolution, Gas evolution rate Application:To Choose the Right resin for the type of casting based on gas evolution rateRoutine Checking of Incoming Coated sand for consistency in resin usage in amount and Quality
Precautions: Extremely Hot Exteriors, Do not touch.Specifications Width: 600 Depth: 450 Height: 750 Weight: 31 Utility: To Check Gas evolution against time, To calculate Gas flow rate, To record Total Gas Evolution Range: 50CC DO not move the machine once switched ONMaintainance: -Contact Us for More Information- Testing Prcoedure: -Contact Us for More Information- Optional Models: VCG: Core Gas determinator Manual Pre-Requisite Equipments: Sand SplitterSand SamplerPrecision Weighing Balance -
Mechanism: It contains a heating mechanism engineered to precisely control the temperature of the heated object to the tune of 100-110 C. Temperatures above this range can cause variations in moisture readings observed hence typically available equipment in the market is not suitable for this purpose because they are not designed to maintain temperature of the heated sand in the band. Misc Spec.: Digital moisture teller is specifically used to obtain precise moisture content in the sand. Sand Type: Raw Sand, Green Sand Test:.. Application:To check moisture in variety of sands
Precautions: Move equipment carefully.Specifications Width: 250 Depth: 350 Height: 250 Weight: 10 Utility: To check Moisture contents in sand Range: 0-20% Ideally equipment should be kept in non airy place, preferably in a glass box.Maintainance: .. Testing Prcoedure: Please contact us for testing procedure Optional Models: Moisture teller (VM) Pre-Requisite Equipments: NA -
The 3D Sifter is a state of art equipment which vibrates the Sieves in a 3D motion at high frequency to achieve consistent Sieving results in short sieving time. With a quick clamp mechanism the equipment is most suitable for variety of materials from foundry sands to pharmaceutical powders. Host of other features link Variable vibration intensity Optional End Tapping at the end of the cycle to reduce manual intervention Almost none moving parts hence minimal maintenance Perfectly silent operation Quick loading of sieves Freedom to use less or more number of sieves The equipment is essentially VGH-III + Set of Sieves. VGH-III is a sifter without sieves -
The Sand Rammer is used to prepare a standard 50mm Dia x50 mm height specimen (1" Dia x 1" height specimen optional on demand) and to determine the compactability of prepared molding sand. The sand specimen prepared with sand rammer is generally further used to in various tests such permeability, compressive strength, shear strength, Friability Test etc. It is also used with CO2 (Silicate sand) to ram Tensile and Transverse specimen as well. -
Mechanism: Consists of loading frame, loading mechanism, Force measuring mechanism, facility to accommodate various accessories, Digital strength indicator, Set of compression pad, compression range up to 15 kg/cm2 ( With High dry strength attachment (VUHD) Compression range =60 kg/cm2 ) Misc Spec.: Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). May Require Pneumatic air supply of 6 Kg/cm2 depending upon choice of variant. Computer interfacing is optional with Customized sand control software i.e VEsion Sand. Please contact us for more information. Range of Equipment 1) Compression-15kg/cm2, 2) Shear -12 kg/cm2, 3) Tensile- 60 kg/cm2 4) Transverse-600 kg/cm2 5) Direct Load -300 kg. 6) With High dry attachment : Compression -60 kg/cm2 Sand Type: Green Sand, Hot box sand, Cold box sand, Resin coated sand, No-bake Sand, Oil Sand, CO2 Sand Test:THIS EQUIPMENT IS ABSOLETE Application:The Equipment is used to determine various strengths, such as compression, shear, tensile, transverse and deformation, of foundry sand directly or with help of attachments.
Precautions: · Clean the equipment after use. · Protect the Parts from rusting. · Apply rust preventing oil when not in use. · Take care of Hands; Do not insert under the plunger. Maintainance: ... Testing Prcoedure: For more details Contact us. Optional Models: Universal Strength machine (Hydraulic) (VUN), Universal Strength Machine (Pendulum Type) (VUM) Pre-Requisite Equipments: Sand Rammer + Base block (VR +VRB) for Green Sand and for other types of sands, appropriate specimen making apparatus along with appropriate strength checking attachments to the machine are required. Please contact us for detailed guidance.Specifications Width: 550 Depth: 330 Height: 610 Weight: 40 Utility: .. Range: 1) Compression-15kg/cm2, 2) Shear -12 kg/cm2, 3) Tensile- 60 kg/cm2 4) Transverse-600 kg/cm2 5) Direct Load -300 kg. 6) With High dry attachment : Compression -60 kg/cm2 -
Mechanism: · It consists of loading frame , loading mechanism,Force measuring mechanism, , controlled heater to heat the specimen up to 300oC, and facility to accommodate special specimen tube. · Digital strength indicator to read wet tensile strength up to 60gms/cm2, temp. Indicator built in timer. Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Requires Pneumatic air supply of 6 Kg/cm2. Misc Spec.: · Fully automatic cycle to determine Wet tensile strength. · Computer interfacing with Customized software to acquire analyze & Plot results is available optionally on demand. · Selectable unit i.e. g/cm2 OR N/mm2 Sand Type: Green Sand Test:TO Determine Wet tensile strength Application:The Surface of clay bonded sand mould is strongly heated, for preset time. Some of the water evaporates and recondenses in the cooler part of the mould, and there is a considerable drop in strength at this portion Wet tensile tester measures this strength. In short, it measures tensile strength in condensation zone.
Precautions: · Burning Hazard Heater temperature 300oC. · Remove accumulated water from FRL unit time-to-time. Maintainance: Clean the equipment after use. Testing Prcoedure: For more details contact us. Optional Models: - Pre-Requisite Equipments: Sand Rammer along with Base block (VR+VRB)Specifications Width: 305 Depth: 470 Height: 550 Weight: 45 Utility: To test Wet tensile strength of green sand. Range: 0 to 60 gms/cm2 -
Digital Permeability meter is a research grade equipment which can also be used in day to day practice to check Permeability of Foundry Sands. It uses the proven dead weight method coupled with high sampling electronics to know exact value of permeability without much user interference. Optionally Readings can be sent to PC or Printed with printer which can be attached to the equipment. -
Mechanism: Consists of pair of hot plates controlled by digital temperature indicators, split mould, tong, sand filler, strength measuring mechanism to read direct tensile strength up to 50 kg/cm2, FRL unit, Pneumatic air supply 6 Kg/cm2 Misc Spec.: Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Requires Pneumatic air supply of 6 Kg/cm2.Computer interfacing is optional with Customized sand control software i.e VEsion Sand. Please contact us for more information. Sand Type: Resin coated sand Test:To Determine the Hot or cold Tensile strength of Resin Coated Sand Application: · The Hot shell strength of sand specimen measured when cured and still in hot condition, Hot Shell Tensile Tester (VHTA) has been designed as a complete unit for forming, curing and breaking the specimen in the same position. · After manually filling the sand in the cavity the machine automatically breaks and shows strength reading after a default or user set dwell time. · It can be used as a production control device in the shop to test batch of shell sand mix.
Precautions: Burning Hazard: Heater temperature 230oC .Do not touch when hot. Maintainance: ... Testing Prcoedure: For more details conact us. Optional Models: --- Pre-Requisite Equipments: ---Specifications Width: 620 Depth: 330 Height: 450 Weight: 34 Utility: .. Range: 50 Kg/cm2 -
Mechanism: Consists of stirrer, glass jar, siphon, timer unit, 53 micron sieve pan, wash bottle. Misc Spec.: 20 micron sieve 100mm Dia., 35mm Ht. (On demand). Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Sand Type: Green Sand & Raw Sand Test:Total Clay Content Application:This equipment helps to determine total clay content in the sand sample.
Precautions: Clean the equipment after use. Protect the Parts from rusting; apply rust preventing oil when not in use. Maintainance: .. Testing Prcoedure: Please contact us for test procedure. Optional Models: Auto Clay Washer (VCWA) Pre-Requisite Equipments: Rapid Dryer (VRD) (Must Have)Specifications Width: 260 Depth: 180 Height: 750 Weight: 36 Utility: .. Range: 50 Gms. -
Mechanism: Shooting/ Blowing, Gas passing & purging. Fully automated cycle. User can set Amine passing time & air purging time. Inbuilt amine evaporation mechanism. Misc Spec.: Consists of dumbbell / dog-bone shape split tensile core box, sand shooting arrangement, gassing & purging accessory, FRL unit suitable for cold box sand & heater with temp. indicator controller up to 2300c. Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Requires Pneumatic air supply of 6 Kg/cm2. Sand Type: Cold box sand Test:Pre-requisite for tensile strength test for Cold box Sand. Application:To prepare specimen from cold box sand for Tensile strength, transverse strength & Hot distortion tests.
Precautions: Burning hazard: the temperature is 230oC. Conform that the quantity of sand is sufficient for sample specimen at every preparation. Insure that the gassing accessory is on the Core box before pressing Maintainance: Clean the core box & core box support vents after continuous run. Testing Prcoedure: for more details Contact us. Optional Models: Universal shooter (Blower) (VUS) Pre-Requisite Equipments: Universal Strength Machine (VUD) along with Tensile strength attachment (VAS)Specifications Width: 460 Depth: 710 Height: 840 Weight: 42 Utility: .. Range: One Specimen -
Mechanism: ... Misc Spec.: Consists of a special specimen tube, knife and compactibility scale. Sand Type: Green Sand Test:Compactibility Application: The Accessory is used to find out the compactibility of moulding sand or prepared sand.
Precautions: Clean the machine after use. Protect the Parts from rusting; apply rust preventing oil when not in use. Maintainance: .. Testing Prcoedure: contact us for more details. Optional Models: VCC- Sand Squeezer Pre-Requisite Equipments: Sand Rammer with Base Block (VR+VRB)Specifications Width: 0 Depth: 65 Height: 185 Weight: 0 Utility: .. Range: 0 to 70 %