Stainless steel test sieves to ISO 3310-1 and ASTM E11, in 8 inch (203 mm) full and half height frames, from 53 to 1700 micron. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Every sieve is supplied with a compliance certificate. Sold as complete ten sieve AFS sets with lid, receiving pan and brush, or individually as replacements.ApertureASTM E11BS 410Typical material1700 µmNo. 1210 meshCoarse foundry fraction850 µmNo. 2018 meshFoundry sand, coarse cut600 µmNo. 3025 meshFoundry sand425 µmNo. 4036 meshFoundry sand, mid cut300 µmNo. 5052 meshFoundry sand212 µmNo. 7072 meshFoundry sand, fine cut150 µmNo. 100100 meshFine sand, powders106 µmNo. 140150 meshFine powders75 µmNo. 200200 meshFines, cement, flour53 µmNo. 270300 meshFoundry pan cut, finesMore on the aperture range, inspection and certification and sieve analysis and the AFS grain fineness number.
-
A complete ten sieve AFS set in full height 8 inch frames, for grain fineness number determination and sieve analysis. Supplied ready to use with lid, receiving pan, brush and a compliance certificate to ISO 3310-1 and ASTM E11. -
A complete ten sieve AFS set in half height 8 inch frames, for grain fineness number determination and sieve analysis. Supplied ready to use with lid, receiving pan, brush and a compliance certificate to ISO 3310-1 and ASTM E11. -
Compliance grade test sieve, 106 micron aperture, in an 8 inch (203 mm) full height stainless steel frame. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Supplied with a compliance certificate to ISO 3310-1 and ASTM E11. Also known as No. 140, 150 mesh.
-
Compliance grade test sieve, 106 micron aperture, in an 8 inch (203 mm) half height stainless steel frame. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Supplied with a compliance certificate to ISO 3310-1 and ASTM E11. Also known as No. 140, 150 mesh.
-
Compliance grade test sieve, 150 micron aperture, in an 8 inch (203 mm) full height stainless steel frame. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Supplied with a compliance certificate to ISO 3310-1 and ASTM E11. Also known as No. 100, 100 mesh.
-
Compliance grade test sieve, 150 micron aperture, in an 8 inch (203 mm) half height stainless steel frame. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Supplied with a compliance certificate to ISO 3310-1 and ASTM E11. Also known as No. 100, 100 mesh.
-
Compliance grade test sieve, 1700 micron aperture, in an 8 inch (203 mm) full height stainless steel frame. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Supplied with a compliance certificate to ISO 3310-1 and ASTM E11. Also known as No. 12, 10 mesh.
-
Compliance grade test sieve, 1700 micron aperture, in an 8 inch (203 mm) half height stainless steel frame. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Supplied with a compliance certificate to ISO 3310-1 and ASTM E11. Also known as No. 12, 10 mesh.
-
Compliance grade test sieve, 212 micron aperture, in an 8 inch (203 mm) full height stainless steel frame. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Supplied with a compliance certificate to ISO 3310-1 and ASTM E11. Also known as No. 70, 72 mesh.
-
Compliance grade test sieve, 212 micron aperture, in an 8 inch (203 mm) half height stainless steel frame. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Supplied with a compliance certificate to ISO 3310-1 and ASTM E11. Also known as No. 70, 72 mesh.
-
Compliance grade test sieve, 300 micron aperture, in an 8 inch (203 mm) full height stainless steel frame. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Supplied with a compliance certificate to ISO 3310-1 and ASTM E11. Also known as No. 50, 52 mesh.
-
Compliance grade test sieve, 300 micron aperture, in an 8 inch (203 mm) half height stainless steel frame. Frame and woven mesh are formed as one piece, with no welding, soldering or filler. Supplied with a compliance certificate to ISO 3310-1 and ASTM E11. Also known as No. 50, 52 mesh.